Why engineered and not solid
Solid 3/4" hardwood is nailed over a wood subfloor, so it is a poor fit for a concrete slab. Engineered boards are built in cross-laid layers that move far less with humidity and heat, which is why they can be glued directly to concrete or floated over it.
Sunca engineered exotic floors are 18 mm with a 3.5 mm top layer over a eucalyptus core and install by nail down or glue down. Sunca engineered white oak comes in 18 mm and 15 mm builds over a poplar core and installs by nail down, glue down or floating.
Condos
Most condo boards require an approved acoustic underlayment and a minimum sound rating before any hard floor goes in. Get the building's flooring rules in writing before quoting, and confirm the underlayment meets them.
Floating engineered white oak over an approved acoustic underlayment is often the simplest route. Glue-down installs need an adhesive or membrane system that also meets the building's sound requirement.
Concrete slabs
Test the slab before anything ships. Concrete holds moisture long after it looks dry, and that moisture ends up in the floor. Record readings and use a moisture barrier or adhesive system rated for the results.
- Test moisture and record the readings
- Check flatness and grind high spots or fill low spots
- Use a vapour barrier or moisture-rated adhesive
- Acclimate material in the space at normal living conditions
- Leave the expansion gap at walls and fixed objects
Radiant heat
Engineered wood is the usual choice over in-floor heating because it moves less than solid. Run the heating system for several days before installation so the slab is dry and stable, then bring it back up gradually afterwards.
Follow the heating and flooring manufacturers' surface temperature limits, avoid sudden temperature swings, and keep indoor humidity steady through the heating season. Confirm the specific product and installation method with Sunca before specifying it over radiant heat.
Frequently asked
- Can hardwood go directly on a concrete condo floor?
- Engineered hardwood can, glued down or floated over an approved underlayment. Solid 3/4" hardwood normally needs a wood subfloor. Most condos also require an approved acoustic underlayment.
- Is engineered hardwood good with radiant floor heating?
- It is the usual choice because it is more stable than solid wood. Follow the manufacturers' temperature limits, keep humidity steady, and confirm the product with Sunca before installing.
- Which Sunca floors can be floated?
- Sunca engineered white oak can be nailed, glued or floated, and Sunca rigid core (SPC) installs floating. Sunca engineered exotic floors install by nail down or glue down.
Need this checked against a live job?
Send us the subfloor, the readings and the product you're planning to use. We'll tell you whether it works before the material ships.
Ask the Sunca team